Epinions.com 
Join Epinions | Learn More! | Sign In   
Home > Message Boards > General Discussion > The Epi Lounge > Any Tips on Repairing a Table with particle board damage?

Any Tips on Repairing a Table with particle board damage?
Posts on this Topic   Search in The Epi Lounge   
Showing 1-19 of 19 posts      
Hide member images Print     Start a new topic     Post a Reply
   
kengland4 Original Post: May 15 '09,  11:01 am           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 225753
Any Tips on Repairing a Table with particle board damage?

We saw this table we've literally been LUSTING over, in the "as-is" section of an Ikea, at 1/2 the normal price. Only problem was, the smooth finish had 4 moderate pits on the surface, exposing some of the particle board underneath. It seems to me some resin/glue could be used to fill these in,and then be sanded and painted to color match. Anyone know a suitable product for this?


Kevin

   
ladyconsumer Posted: May 15 '09,  11:57 am           Reply
Reviews written: 680
Member since: Jul 11 '05
Post: 225764
RE: Any Tips on Repairing a Table with particle board damage?

You might want to email Larry (user gamblin_man) - he knows all about glues and tools and stuff.


   
sleeper54 Posted: May 15 '09,  12:46 pm           Reply
Reviews written: 497
Member since: Feb 24 '01
Post: 225769
RE: Any Tips on Repairing a Table with particle board damage?

Quote: kengland4
--snip--

Anyone know a suitable product for this?


Kevin

Tablecloth, table runner, pretty pot, unfolded laundry, groceries not put away..??

Or maybe Mona's thought.



...tom...
.
   
kengland4 Posted: May 15 '09,  2:25 pm           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 225782
RE: Any Tips on Repairing a Table with particle board damage?

Quote: sleeper54
Tablecloth, table runner, pretty pot, unfolded laundry, groceries not put away..??

Or maybe Mona's thought.



...tom...
.


We'd likely use the table's beautiful finish, but those are nice tries, lol. There are 4 evenly-spaced slight gouches, with some splintering.



Kevin
   
kengland4 Posted: May 15 '09,  10:52 pm           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 225810
We Got the $299 table--for $69!!! Now on to fixing it...

I couldn't get it off my mind. We rushed there (about 40 miles) right after work, dropping my daughter off in the mini-daycare. Marched straight to "As Is" section, and lo and behold...it was STILL THERE!!! Not only that, we found they had just reduced the price-TODAY-to $69!!! SOLD! I couldn't believe our luck! I had to completely disassemble it to fit it and the 4 chairs into my Nissan subcompact, however. I'll put a pic of the tabletop on my Facebook page ("Kevin England), and a link here, soon...

The salesguy said to just "add another coat" of varnish? Lacquer? I forgot exactly what he said, but I'm sure any hardware store could figure it out.

Kevin

   
ladyconsumer Posted: May 16 '09,  7:13 am (Updated: May 16 '09,  5:53 pm)           Reply
Reviews written: 680
Member since: Jul 11 '05
Post: 225816
RE: We Got the $299 table--for $69!!! Now on to fixing it...

Wow, Kevin, That is AWESOME!!

Nothing like finding a piece you love at an amazing sale price... Enjoy it!!

Mona

   
talyseon Posted: May 16 '09,  8:44 am           Reply
Reviews written: 875
Member since: Jan 17 '08
Post: 225823
RE: We Got the $299 table--for $69!!! Now on to fixing it...

Try plastic wood putty. It is used to repair gouges in real wood. I don't see why it wouldn't work.

Talyseon.

   
kengland4 Posted: May 17 '09,  8:21 am           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 225879
RE: We Got the $299 table--for $69!!! Now on to fixing it...

Quote: talyseon
Try plastic wood putty. It is used to repair gouges in real wood. I don't see why it wouldn't work.

Talyseon.



I knew I could count on you guys to come up with something I'd never heard of! Incredible!!! I'm taking the photo of the tabletop for my Facebook page right now, for the famously curious :P


Kevin
   
kengland4 Posted: May 17 '09,  9:27 am           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 225886
Here's the link to the Damage Photos...

http://facebook.com/album.php?aid=67651&id=629793479&l=1cb6338472


Kevin

   
ladyconsumer Posted: May 17 '09,  10:41 am           Reply
Reviews written: 680
Member since: Jul 11 '05
Post: 225895
RE: Here's the link to the Damage Photos...

Oh wow - those were far bigger gouges than what I was imagining. Good luck in your endeavor to repair!

   
sleeper54 Posted: May 17 '09,  4:35 pm           Reply
Reviews written: 497
Member since: Feb 24 '01
Post: 225909
RE: Here's the link to the Damage Photos...

Quote: ladyconsumer
Oh wow - those were far bigger gouges than what I was imagining. Good luck in your endeavor to repair!

Ditto Mona's thoughts.

Looks like someone used it for target practice.

A tip for next time ...throw a coin or three into the picture for 'scale'.

No better ideas for fixing it. But it does look like an eight-inch pot (and plate) will just about cover it. If you can only keep the cat from knocking it off.

. . . ...:weaklamesmiliemoment:...



...tom...
.
   
kengland4 Posted: May 17 '09,  6:21 pm           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 225915
Here's the Repair Plan...

I just got back from Builder's Emporium (or equivalent--who can keep up with all these "home improvement" stores these days?), and decided on some Elmer's stainable wood filler (contains real wood fibers), dark walnut wood finish, and a Norton 3X wood medium sanding sponge, after consulting with several specialists. This filler is sandable (high-speed OK), stainable, and will hold screws and nails. It's solvent-free, resists shrinking and cracking, and has "easy water clean-up." I was going to go with wood putty, but it can't be sanded, is already color-matched, and doesn't seem strong enough. If I have to, I'll get a wood marker or pencil to match the dark stain later. This all cost $15, but I figure I expect to get some good use out of this budget table, so it's a small price to pay. After all, it's $299 new, and look at the experience I'll have!!!


Kevin

P.S. I'll throw up a link to the finished product...eventually!

   
pvreditor Posted: May 18 '09,  12:22 pm (Updated: May 18 '09,  12:22 pm)           Reply
Reviews written: 408
Member since: May 31 '02
moderator in Cars, Home & Garden, Musical Equipment
Post: 225955
RE: Here's the Repair Plan...

Quote: kengland4
I just got back from Builder's Emporium (or equivalent--who can keep up with all these "home improvement" stores these days?), and decided on some Elmer's stainable wood filler (contains real wood fibers), dark walnut wood finish, and a Norton 3X wood medium sanding sponge, after consulting with several specialists. This filler is sandable (high-speed OK), stainable, and will hold screws and nails. It's solvent-free, resists shrinking and cracking, and has "easy water clean-up." I was going to go with wood putty, but it can't be sanded, is already color-matched, and doesn't seem strong enough. If I have to, I'll get a wood marker or pencil to match the dark stain later. This all cost $15, but I figure I expect to get some good use out of this budget table, so it's a small price to pay. After all, it's $299 new, and look at the experience I'll have!!!

I've used stainable wood filler on a kitchen cabinet door on which I had a little accident with a router, and it worked out better than I expected. Once the door was stained, the wood filler just looked like a variation in the overall wood. I used a dark stain and sanded all lacquer/paint off the door before filling and staining. It was part of an overall kitchen freshening project and it went very well, and nobody noticed the repaired door. I always knew where to look, though...

--Bob
   
kengland4 Posted: May 18 '09,  9:50 pm           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 226006
RE: Here's the Repair Plan...

I guess I'd do best to completely sand the tabletop's surface, and use the stain, which has a built-in sealer... I was planning to just spot-stain it, but that would probably be messy. I think I'll tackle it tonight...


Kevin

   
sleeper54 Posted: May 18 '09,  9:57 pm           Reply
Reviews written: 497
Member since: Feb 24 '01
Post: 226009
RE: Here's the Repair Plan...

Quote: kengland4
--snip--

...and decided on some Elmer's stainable wood filler (contains real wood fibers), dark walnut wood finish, and a Norton 3X wood medium sanding sponge, after consulting with several specialists.

--snip--

Kevin

P.S. I'll throw up a link to the finished product...eventually!

.
Hey n00b (he jokingly said...) you forgot the most important thing...

.

.

...are the products on Epinions for you to review later..??




...tom...
.
   
sleeper54 Posted: May 18 '09,  10:01 pm           Reply
Reviews written: 497
Member since: Feb 24 '01
Post: 226010
RE: Here's the Repair Plan...

Quote: pvreditor
--snip--

...it went very well, and nobody noticed the repaired door. I always knew where to look, though...

--Bob

The number one lesson of art or home improvement or whatever.

You see the 1 percent wrong and everyone else sees only the 99 percent right.


Of course, you start creeping up around 2, 3, 5 percent 'wrong' and peeps start biting their tongues and verbally rating it 'Very Helpful' when they know it aint.



...tom...
.
   
kengland4 Posted: May 19 '09,  6:34 am           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 226034
RE: Here's the Repair Plan...

Quote: sleeper54
.
Hey n00b (he jokingly said...) you forgot the most important thing...

.

.

...are the products on Epinions for you to review later..??




...tom...
.


Good point, Tom! That would enable me to reach that magic "100 review" mark. I'm sure the "tipping point" is near..!


Kevin
   
kengland4 Posted: May 20 '09,  10:45 am           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 226183
UPDATE!!!

I had to remove some of the surface due to splintering (it seemed to be a cheap laminate substance so it would be smooth, and went ahead and sealed everything. I then took it to my carpenter neighbor, who will be sanding down the entire surface, and applying the stain/sealant. I can't wait, but I'm keeping my fingers crossed!!!



Kevin

   
kengland4 Posted: May 20 '09,  8:27 pm           Reply
Reviews written: 99
Member since: Dec 15 '01
Post: 226282
Pics of Finalized Result..!!!

Here's the link to the Facebook album with the finished look. http://www.facebook.com/album.php?aid=67651&id=629793479&l=1cb6338472

It is a public album, viewable by anyone.

I haven't talked to my neighbor about it yet, but I want to do something-like use a marker-to match the color better.


Kevin

Hide member images Print     Start a new topic     Post a Reply
Showing 1-19 of 19 posts      
Return to top

Help | Member Center | Message Boards | Site Rules | User Agreement | Privacy Policy | Site Index | Topic Index  
About Epinions | Careers | Contact Epinions | Advertising  

Epinions | Shopping.com | Rent.com | Free Classifieds | Price Comparison UK

Shopping.com Network © 1999-2009 Shopping.com, Inc. Trademark Notice

Epinions.com periodically updates pricing and product information from third-party sources,
so some information may be slightly out-of-date. You should confirm all information before relying on it.